rgoes2 Antenna-Theory.com Newbie
Joined: 11 Jan 2017 Posts: 6
|
Posted: Thu Jan 26, 2017 1:42 pm Post subject: |
|
|
Im just a newbie, but here we go,
I did a probe feed horn antenna and I found that the impedance is related with the length, radius and the distance of the probe. Basically, what you have to find is the wavelength in free space(lambda0), and 1/4 of it will be the length of your probe inside the wave guide(more less), It need some adjust though. After you have to have the wavelength along the wave guide (lambdag) and 1/4 will be the distance of your probe. At last, you have to adjust your conector to have the radius of a +/- 50ohms ( Zo= (138/sqrt(Er))*log10(D/d) , aprox. 50).
D is the diameter of your dieletric and d is the diameter of your pin conductor.
Hope it helps, if I wrote something wrong please, correct me I will appreciate, because I am in the process of learning |
|