Antenna - Theory .com: The Antenna Site

Antenna Basics Antenna Types Smith Charts Antenna Measurements

antenna-theory.com :: View topic - Diversity antenna setup
antenna-theory.com Forum Index antenna-theory.com
Antenna Theory
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Diversity antenna setup

 
Post new topic   Reply to topic    antenna-theory.com Forum Index -> Questions Related to Antenna Theory
View previous topic :: View next topic  
Author Message
TGW
Antenna-Theory.com Newbie


Joined: 08 Mar 2017
Posts: 1

PostPosted: Wed Mar 08, 2017 11:29 pm    Post subject: Diversity antenna setup Reply with quote

I am currently wondering about how to create a UHF (LMR) 'diversity' antenna using a an omni fiberglass whip antenna and yagi beam. I need the beam to be radiate with a certain azimuth away from whip. Example: Omni (107") (LMR, UHF) is at a particular location about 25' off of the ground on a mast, a Yagi (UHF, LMR) mounted to the same mast (height is arbitrary, unless a recommended one is neccessary) pointing into a certain direction of desired extended RF coverage. Would all that is required be a phasing cable [harness] (maintaining correct impedance and phase) to split the TX signal to each antenna? Thank you in advance for answering.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    antenna-theory.com Forum Index -> Questions Related to Antenna Theory All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group