View previous topic :: View next topic 
Author 
Message 
W4BSG AntennaTheory.com Newbie
Joined: 15 Jun 2009 Posts: 3 Location: Alabama

Posted: Mon Jun 15, 2009 1:26 am Post subject: Definition help 


Hello
I have a question, based on several articles I have reviewed today. I have seen "Effective Aperture" related to the expression:
Ae=(lambda)^2/(4 Pi)
But I thought it should be:
Ae=Pi (lambda)^2 /4
(Both equations should have efficiency terms applied)
I am questioning this because Kraus has the second, but Wikipedia and another web reference haves at least two places where the first is given.
Have I lost my marbles?
ThanksBill 

Back to top 


admin Site Admin
Joined: 03 Jan 2007 Posts: 201

Posted: Mon Jun 15, 2009 9:45 pm Post subject: Effective Aperture 


I have only seen the effective aperture defined as:
Ae = (lambda^2)*Gain/(4*pi)
Note that the effective aperture is defined as the amount of power delivered to the load for a plane wave incident upon the antenna:
Ae = [Power Delivered  watts]/[Incident Power Density from a plane Wave  watts/meter^2]
See:
http://www.antennatheory.com/basics/aperture.php
I'm not sure where Kraus's definition comes from. If he defines things differently it could very well show up as he has it....however, I believe the definition above is now standard. 

Back to top 


W4BSG AntennaTheory.com Newbie
Joined: 15 Jun 2009 Posts: 3 Location: Alabama

Posted: Tue Jun 16, 2009 3:13 pm Post subject: Definition help 


I am still confused. I was of the opinion that Aperture had units of Area, but your words give the units as power. As I was using it, Power density * aperture = power. For a circular aperture of diameter=Lambda, the area would be:
A=(Pi/4)*lambda^2 with units of M^2.
Then power,W from a wave of power density with units W/M^2 would be as I had it before, with Pi in the numerator.
Well, back to the refereces. Where do I find IEEE definitions?
Bill 

Back to top 


admin Site Admin
Joined: 03 Jan 2007 Posts: 201

Posted: Tue Jun 16, 2009 5:09 pm Post subject: units of area 


The ratio of power [in watts] to power density [in watts/meter^2] does give the units of area [meter^2]. This is how I was defining it.
Remember that the physical area of an antenna (Ap) is not equal to the effective aperture (Ae) or how much power the antenna captures. 

Back to top 


W4BSG AntennaTheory.com Newbie
Joined: 15 Jun 2009 Posts: 3 Location: Alabama

Posted: Tue Jun 16, 2009 5:55 pm Post subject: 


I realize that physical and effective areas are different, but they ARE related. Over a fair range of sizes, the relationship is scalable. However, in most circular functions, Pi has a fixed function, and the expressions I am puzzled by are not familiar.
What is the path of derivation in this area that carries Pi from the numerator to the denominator?
Bill Puzzled. 

Back to top 


